dmesg - AMD Phenom II X6 1090T
Linux version 4.5.0-0.bpo.2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.5.4-1~bpo8+1 (2016-05-13)
tseg: 0000000000
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009b3ff] usable
BIOS-e820: [mem 0x000000000009b400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bbf9ffff] usable
BIOS-e820: [mem 0x00000000bbfa0000-0x00000000bbfb7fff] ACPI data
BIOS-e820: [mem 0x00000000bbfb8000-0x00000000bbfdffff] ACPI NVS
BIOS-e820: [mem 0x00000000bbfe0000-0x00000000bbfedfff] reserved
BIOS-e820: [mem 0x00000000bbff0000-0x00000000bbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/M4N68T-M-LE-V2, BIOS 0702 01/26/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFE0000000 write-back
2 base 0000A0000000 mask FFFFF0000000 write-back
3 base 0000B0000000 mask FFFFF8000000 write-back
4 base 0000B8000000 mask FFFFFC000000 write-back
5 disabled
6 disabled
7 disabled
TOM2: 0000000240000000 aka 9216M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xbc000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbbfa0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Base memory trampoline at [ffff880000095000] 95000 size 24576
Using GB pages for direct mapping
BRK [0x01d4a000, 0x01d4afff] PGTABLE
BRK [0x01d4b000, 0x01d4bfff] PGTABLE
BRK [0x01d4c000, 0x01d4cfff] PGTABLE
RAMDISK: [mem 0x36174000-0x370b1fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FB590 000024 (v02 ACPIAM)
ACPI: XSDT 0x00000000BBFA0100 00005C (v01 012611 XSDT2008 20110126 MSFT 00000097)
ACPI: FACP 0x00000000BBFA0290 0000F4 (v03 012611 FACP2008 20110126 MSFT 00000097)
ACPI: DSDT 0x00000000BBFA0460 007CD8 (v01 A1704 A1704000 00000000 INTL 20060113)
ACPI: FACS 0x00000000BBFB8000 000040
ACPI: FACS 0x00000000BBFB8000 000040
ACPI: APIC 0x00000000BBFA0390 000090 (v01 012611 APIC2008 20110126 MSFT 00000097)
ACPI: MCFG 0x00000000BBFA0420 00003C (v01 012611 OEMMCFG 20110126 MSFT 00000097)
ACPI: OEMB 0x00000000BBFB8040 000071 (v01 012611 OEMB2008 20110126 MSFT 00000097)
ACPI: SRAT 0x00000000BBFA8140 000108 (v01 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: HPET 0x00000000BBFA8250 000038 (v01 012611 OEMHPET0 20110126 MSFT 00000097)
ACPI: SSDT 0x00000000BBFA8290 000DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x23fffffff]
NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x23fffffff] -> [mem 0x00000000-0x23fffffff]
NODE_DATA(0) allocated [mem 0x23fff9000-0x23fffdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000023fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009afff]
node 0: [mem 0x0000000000100000-0x00000000bbf9ffff]
node 0: [mem 0x0000000100000000-0x000000023fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff]
On node 0 totalpages: 2080570
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3994 pages, LIFO batch:0
DMA32 zone: 11967 pages used for memmap
DMA32 zone: 765856 pages, LIFO batch:31
Normal zone: 20480 pages used for memmap
Normal zone: 1310720 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 6, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
smpboot: Allowing 6 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e1fff]
PM: Registered nosave memory: [mem 0x000e2000-0x000fffff]
PM: Registered nosave memory: [mem 0xbbfa0000-0xbbfb7fff]
PM: Registered nosave memory: [mem 0xbbfb8000-0xbbfdffff]
PM: Registered nosave memory: [mem 0xbbfe0000-0xbbfedfff]
PM: Registered nosave memory: [mem 0xbbfee000-0xbbfeffff]
PM: Registered nosave memory: [mem 0xbbff0000-0xbbffffff]
PM: Registered nosave memory: [mem 0xbc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffefffff]
PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
e820: [mem 0xbc000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88023fc00000 s94296 r8192 d32680 u262144
pcpu-alloc: s94296 r8192 d32680 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2048038
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0x170e000000-0x170fffffff] (32MB)
Aperture beyond 4GB. Ignoring.
AGP: Your BIOS doesn't leave an aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xb0000000-0xb3ffffff] (65536KB)
PM: Registered nosave memory: [mem 0xb0000000-0xb3ffffff]
Memory: 8029228K/8322280K available (5883K kernel code, 1169K rwdata, 2940K rodata, 1328K init, 832K bss, 293052K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=6.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
NR_IRQS:33024 nr_irqs:472 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3214.875 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6429.75 BogoMIPS (lpj=12859500)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160108
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: disabled by default; enable with sysctl kernel.yama.*
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Disabling memory control group subsystem
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
Freeing SMP alternatives memory: 24K (ffffffff81c72000 - ffffffff81c78000)
ftrace: allocating 24126 entries in 95 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Phenom(tm) II X6 1090T Processor (family: 0x10, model: 0xa, stepping: 0x0)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5
x86: Booted up 1 node, 6 CPUs
smpboot: Total of 6 processors activated (38578.50 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbbfb8000-0xbbfdffff] (163840 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [1000, ffffff]
TOM: 00000000c0000000 aka 3072M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [c0000000, fe0bffff] ==> [c0000000, dfffffff] and [f0000000, fe0bffff]
TOM2: 0000000240000000 aka 9216M
bus: [bus 00-07] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xc0000000-0xdfffffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x240000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PCIeCapability]
acpi PNP0A03:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A03:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:00: _OSC: platform willing to grant [PME AER]
acpi PNP0A03:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xbc000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [10de:03e2] type 00 class 0x050000
pci 0000:00:01.0: [10de:03e1] type 00 class 0x060100
pci 0000:00:01.0: reg 0x10: [io 0x0900-0x09ff]
pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
pci 0000:00:01.1: reg 0x10: [io 0x0e00-0x0e3f]
pci 0000:00:01.1: reg 0x20: [io 0x0600-0x063f]
pci 0000:00:01.1: reg 0x24: [io 0x0700-0x073f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
pci 0000:00:02.0: reg 0x10: [mem 0xdfffb000-0xdfffbfff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
pci 0000:00:02.1: reg 0x10: [mem 0xdfffac00-0xdfffacff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: System wakeup disabled by ACPI
pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
pci 0000:00:05.0: reg 0x10: [mem 0xdfff4000-0xdfff7fff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
pci 0000:00:06.0: reg 0x20: [io 0xffa0-0xffaf]
pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000
pci 0000:00:07.0: reg 0x10: [mem 0xdfff9000-0xdfff9fff]
pci 0000:00:07.0: reg 0x14: [io 0xe480-0xe487]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
pci 0000:00:08.0: reg 0x10: [io 0xe400-0xe407]
pci 0000:00:08.0: reg 0x14: [io 0xe080-0xe083]
pci 0000:00:08.0: reg 0x18: [io 0xe000-0xe007]
pci 0000:00:08.0: reg 0x1c: [io 0xdc00-0xdc03]
pci 0000:00:08.0: reg 0x20: [io 0xd880-0xd88f]
pci 0000:00:08.0: reg 0x24: [mem 0xdfff8000-0xdfff8fff]
pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
pci 0000:00:08.1: reg 0x10: [io 0xd800-0xd807]
pci 0000:00:08.1: reg 0x14: [io 0xd480-0xd483]
pci 0000:00:08.1: reg 0x18: [io 0xd400-0xd407]
pci 0000:00:08.1: reg 0x1c: [io 0xd080-0xd083]
pci 0000:00:08.1: reg 0x20: [io 0xd000-0xd00f]
pci 0000:00:08.1: reg 0x24: [mem 0xdffef000-0xdffeffff]
pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: System wakeup disabled by ACPI
pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: System wakeup disabled by ACPI
pci 0000:00:0d.0: [10de:03d6] type 00 class 0x030000
pci 0000:00:0d.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:00:0d.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:0d.0: reg 0x1c: [mem 0xdd000000-0xddffffff 64bit]
pci 0000:00:0d.0: reg 0x30: [mem 0xdffc0000-0xdffdffff pref]
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:04.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:04.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0xbc000000-0xdfffffff window] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:0b.0: PCI bridge to [bus 03]
pci 0000:00:0c.0: PCI bridge to [bus 04]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI: Enabled 1 GPEs in block 20 to 5F
vgaarb: setting as boot device: PCI:0000:00:0d.0
vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:0d.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009b400-0x0009ffff]
e820: reserve RAM buffer [mem 0xbbfa0000-0xbbffffff]
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:02: disabling [io 0x0900-0x097f] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
pnp 00:02: disabling [io 0x0980-0x09ff] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x0800-0x080f] has been reserved
system 00:02: [io 0x0500-0x057f] could not be reserved
system 00:02: [io 0x0580-0x05ff] has been reserved
system 00:02: [io 0x0800-0x087f] could not be reserved
system 00:02: [io 0x0880-0x08ff] has been reserved
system 00:02: [io 0x0d00-0x0d7f] has been reserved
system 00:02: [io 0x0d80-0x0dff] has been reserved
system 00:02: [io 0x1100-0x117f] has been reserved
system 00:02: [io 0x1180-0x11ff] has been reserved
system 00:02: [mem 0x000d0000-0x000d3fff window] has been reserved
system 00:02: [mem 0x000d4000-0x000d7fff window] has been reserved
system 00:02: [mem 0x000de000-0x000dffff window] has been reserved
system 00:02: [mem 0xfec80000-0x1fd93ffff] could not be reserved
system 00:02: [mem 0xfefe0000-0xfefe01ff] has been reserved
system 00:02: [mem 0xfefe1000-0xfefe1fff] has been reserved
system 00:02: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:03: [mem 0xbc000000-0xbfffffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x0230-0x023f] has been reserved
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: [io 0x0a00-0x0a0f] has been reserved
system 00:04: [io 0x0a30-0x0a3f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:07: [mem 0x00100000-0xbbffffff] could not be reserved
system 00:07: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:0b.0: PCI bridge to [bus 03]
pci 0000:00:0c.0: PCI bridge to [bus 04]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xbc000000-0xdfffffff window]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:01: resource 8 [mem 0xbc000000-0xdfffffff window]
pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 15608K (ffff880036174000 - ffff8800370b2000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ b0000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1465290902.036:1): initialized
Initialise system trusted keyring
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
GHES: HEST is not enabled!
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
microcode: CPU0: patch_level=0x010000bf
microcode: CPU1: patch_level=0x010000bf
microcode: CPU2: patch_level=0x010000bf
microcode: CPU3: patch_level=0x010000bf
microcode: CPU4: patch_level=0x010000bf
microcode: CPU5: patch_level=0x010000bf
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
zswap: loaded using pool lzo/zbud
rtc_cmos 00:00: setting system clock to 2016-06-07 09:15:02 UTC (1465290902)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1328K (ffffffff81b26000 - ffffffff81c72000)
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 248K (ffff8800015c2000 - ffff880001600000)
Freeing unused kernel memory: 1156K (ffff8800018df000 - ffff880001a00000)
x86/mm: Checked W+X mappings: passed, no W+X pages found.
systemd-udevd[90]: starting version 215
random: systemd-udevd urandom read with 2 bits of entropy available
fjes: module verification failed: signature and/or required key missing - tainting kernel
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
SCSI subsystem initialized
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
libata version 3.00 loaded.
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr f4:6d:04:93:2c:2c
forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
ehci-pci 0000:00:02.1: EHCI Host Controller
ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:02.1: debug port 1
ehci-pci 0000:00:02.1: cache line size of 64 is not supported
ehci-pci 0000:00:02.1: irq 22, io mem 0xdfffac00
ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.5.0-0.bpo.2-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
sata_nv 0000:00:08.0: version 3.5
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
ohci-pci: OHCI PCI platform driver
scsi host0: sata_nv
scsi host1: sata_nv
ata1: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xd880 irq 20
ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd888 irq 20
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
scsi host2: sata_nv
scsi host3: sata_nv
ata3: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd000 irq 23
ata4: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xd008 irq 23
pata_amd 0000:00:06.0: version 0.4.1
scsi host4: pata_amd
scsi host5: pata_amd
ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ohci-pci 0000:00:02.0: OHCI PCI host controller
ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:02.0: irq 23, io mem 0xdfffb000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 4.5.0-0.bpo.2-amd64 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
usb 1-2: new high-speed USB device number 2 using ehci-pci
usb 1-2: New USB device found, idVendor=04e8, idProduct=685b
usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-2: Product: GT-I9000
usb 1-2: Manufacturer: samsung
usb 1-2: SerialNumber: 3534670C2A7C00EC
usb-storage 1-2:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: HPA detected: current 1953523055, native 1953525168
ata2.00: ATA-8: ST31000528AS, CC46, max UDMA/133
ata2.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST31000528AS CC46 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 1953523055 512-byte logical blocks: (1.00 TB/932 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 1:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 3214.619 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e563bf53da, max_idle_ns: 440795214095 ns
ata4: SATA link down (SStatus 0 SControl 300)
ata6: port disabled--ignoring
sd 1:0:0:0: Attached scsi generic sg0 type 0
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
scsi 6:0:0:0: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
scsi 6:0:0:1: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:1: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:1: [sdc] Attached SCSI removable disk
clocksource: Switched to clocksource tsc
random: nonblocking pool is initialized
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:01: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
systemd-udevd[227]: starting version 215
lp0: using parport0 (interrupt-driven).
fuse init (API version 7.24)
ACPI: acpi_idle registered with cpuidle
acpi-cpufreq: overriding BIOS provided _PSD data
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[219]: Received request to flush runtime journal from PID 1
EDAC MC: Ver: 3.0.0
MCE: In-kernel MCE decoding enabled.
forcedeth 0000:00:07.0 eth2: renamed from eth0
systemd-udevd[286]: renamed network interface eth0 to eth2
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
input: PC Speaker as /devices/platform/pcspkr/input/input5
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
ACPI Warning: SystemIO range 0x0000000000000600-0x000000000000063F conflicts with OpRegion 0x0000000000000600-0x00000000000006FF (\_SB.PCI0.SBRG.ASOC.SMRG) (20160108/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
i2c i2c-0: nForce2 SMBus adapter at 0x700
systemd-journald[219]: Received request to flush runtime journal from PID 1
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
[drm] Initialized drm 1.1.0 20060810
wmi: Mapper loaded
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
snd_hda_intel 0000:00:05.0: Disabling MSI
ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 21
nouveau 0000:00:0d.0: NVIDIA C61 (04c000a2)
nouveau 0000:00:0d.0: bios: version 05.61.32.28.00
nouveau 0000:00:0d.0: disp: dcb 1 type 4 unknown
nouveau 0000:00:0d.0: fb: 64 MiB of unknown memory type
[TTM] Zone kernel: Available graphics memory: 4056772 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau 0000:00:0d.0: DRM: VRAM: 61 MiB
nouveau 0000:00:0d.0: DRM: GART: 512 MiB
nouveau 0000:00:0d.0: DRM: TMDS table version 1.1
nouveau 0000:00:0d.0: DRM: DCB version 3.0
nouveau 0000:00:0d.0: DRM: DCB outp 00: 01000310 00000023
nouveau 0000:00:0d.0: DRM: DCB outp 01: 00110204 942b0003
nouveau 0000:00:0d.0: DRM: DCB conn 00: 0000
nouveau 0000:00:0d.0: DRM: DCB conn 01: 1131
nouveau 0000:00:0d.0: DRM: DCB conn 02: 0110
nouveau 0000:00:0d.0: DRM: DCB conn 03: 0111
nouveau 0000:00:0d.0: DRM: DCB conn 04: 0113
nouveau 0000:00:0d.0: DRM: Saving VGA fonts
nouveau 0000:00:0d.0: DRM: DCB type 4 not known
nouveau 0000:00:0d.0: DRM: Unknown-1 has no encoders, removing
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau 0000:00:0d.0: DRM: MM: using M2MF for buffer copies
nouveau 0000:00:0d.0: DRM: allocated 1920x1200 fb: 0x9000, bo ffff88023414a400
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 240x75
nouveau 0000:00:0d.0: fb0: nouveaufb frame buffer device
[drm] Initialized nouveau 1.3.1 20120801 for 0000:00:0d.0 on minor 0
snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708S: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_via hdaudioC0D0: dig-out=0x20/0x0
snd_hda_codec_via hdaudioC0D0: inputs:
snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
snd_hda_codec_via hdaudioC0D0: Line=0x1b
Adding 8208380k swap on /dev/sda5. Priority:-1 extents:1 across:8208380k FS
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
warning: process `ntpd' used the deprecated sysctl system call with 1.40.6.
vboxdrv: Found 6 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3214545513 Hz
vboxdrv: Successfully loaded version 5.0.20_Debian (interface 0x00240000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
forcedeth 0000:00:07.0 eth2: MSI enabled
nouveau 0000:00:0d.0: bus: MMIO write of 004a0001 FAULT at 00b000
usb 1-2: USB disconnect, device number 2
usb 1-2: new high-speed USB device number 3 using ehci-pci
usb 1-2: New USB device found, idVendor=04e8, idProduct=685b
usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-2: Product: GT-I9000
usb 1-2: Manufacturer: samsung
usb 1-2: SerialNumber: 3534670C2A7C00EC
usb-storage 1-2:1.0: USB Mass Storage device detected
scsi host7: usb-storage 1-2:1.0
scsi 7:0:0:0: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
scsi 7:0:0:1: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
sd 7:0:0:0: Attached scsi generic sg1 type 0
sd 7:0:0:1: Attached scsi generic sg2 type 0
sd 7:0:0:0: [sdb] Attached SCSI removable disk
sd 7:0:0:1: [sdc] Attached SCSI removable disk
usb 1-2: USB disconnect, device number 3
usb 1-2: new high-speed USB device number 4 using ehci-pci
usb 1-2: New USB device found, idVendor=04e8, idProduct=6863
usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-2: Product: GT-I9000
usb 1-2: Manufacturer: samsung
usb 1-2: SerialNumber: 3534670C2A7C00EC
usbcore: registered new interface driver cdc_ether
rndis_host 1-2:1.0 usb0: register 'rndis_host' at usb-0000:00:02.1-2, RNDIS device, 02:70:46:40:36:32
usbcore: registered new interface driver rndis_host
usb 1-2: USB disconnect, device number 4
rndis_host 1-2:1.0 usb0: unregister 'rndis_host' usb-0000:00:02.1-2, RNDIS device
usb 1-2: new high-speed USB device number 5 using ehci-pci
usb 1-2: New USB device found, idVendor=04e8, idProduct=685b
usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-2: Product: GT-I9000
usb 1-2: Manufacturer: samsung
usb 1-2: SerialNumber: 3534670C2A7C00EC
usb-storage 1-2:1.0: USB Mass Storage device detected
scsi host8: usb-storage 1-2:1.0
scsi 8:0:0:0: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
scsi 8:0:0:1: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
sd 8:0:0:0: Attached scsi generic sg1 type 0
sd 8:0:0:1: Attached scsi generic sg2 type 0
sd 8:0:0:0: [sdb] Attached SCSI removable disk
sd 8:0:0:1: [sdc] Attached SCSI removable disk
usb 1-2: USB disconnect, device number 5
usb 1-2: new high-speed USB device number 6 using ehci-pci
usb 1-2: New USB device found, idVendor=04e8, idProduct=6863
usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-2: Product: GT-I9000
usb 1-2: Manufacturer: samsung
usb 1-2: SerialNumber: 3534670C2A7C00EC
rndis_host 1-2:1.0 usb0: register 'rndis_host' at usb-0000:00:02.1-2, RNDIS device, 02:70:46:40:36:32
usb 1-2: USB disconnect, device number 6
rndis_host 1-2:1.0 usb0: unregister 'rndis_host' usb-0000:00:02.1-2, RNDIS device
usb 1-2: new high-speed USB device number 7 using ehci-pci
usb 1-2: New USB device found, idVendor=04e8, idProduct=685b
usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-2: Product: GT-I9000
usb 1-2: Manufacturer: samsung
usb 1-2: SerialNumber: 3534670C2A7C00EC
usb-storage 1-2:1.0: USB Mass Storage device detected
scsi host9: usb-storage 1-2:1.0
scsi 9:0:0:0: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
scsi 9:0:0:1: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
sd 9:0:0:0: Attached scsi generic sg1 type 0
sd 9:0:0:1: Attached scsi generic sg2 type 0
sd 9:0:0:0: [sdb] Attached SCSI removable disk
sd 9:0:0:1: [sdc] Attached SCSI removable disk
usb 1-2: USB disconnect, device number 7
usb 1-2: new high-speed USB device number 8 using ehci-pci
usb 1-2: New USB device found, idVendor=04e8, idProduct=6863
usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-2: Product: GT-I9000
usb 1-2: Manufacturer: samsung
usb 1-2: SerialNumber: 3534670C2A7C00EC
rndis_host 1-2:1.0 usb0: register 'rndis_host' at usb-0000:00:02.1-2, RNDIS device, 02:70:46:40:36:32
usb 1-2: USB disconnect, device number 8
rndis_host 1-2:1.0 usb0: unregister 'rndis_host' usb-0000:00:02.1-2, RNDIS device
usb 1-2: new high-speed USB device number 9 using ehci-pci
usb 1-2: New USB device found, idVendor=04e8, idProduct=685b
usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-2: Product: GT-I9000
usb 1-2: Manufacturer: samsung
usb 1-2: SerialNumber: 3534670C2A7C00EC
usb-storage 1-2:1.0: USB Mass Storage device detected
scsi host10: usb-storage 1-2:1.0
scsi 10:0:0:0: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
scsi 10:0:0:1: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
sd 10:0:0:0: Attached scsi generic sg1 type 0
sd 10:0:0:1: Attached scsi generic sg2 type 0
sd 10:0:0:0: [sdb] Attached SCSI removable disk
sd 10:0:0:1: [sdc] Attached SCSI removable disk
usb 1-2: USB disconnect, device number 9
usb 1-2: new high-speed USB device number 10 using ehci-pci
usb 1-2: New USB device found, idVendor=04e8, idProduct=6863
usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-2: Product: GT-I9000
usb 1-2: Manufacturer: samsung
usb 1-2: SerialNumber: 3534670C2A7C00EC
rndis_host 1-2:1.0 usb0: register 'rndis_host' at usb-0000:00:02.1-2, RNDIS device, 02:70:46:40:36:32
usb 1-2: USB disconnect, device number 10
rndis_host 1-2:1.0 usb0: unregister 'rndis_host' usb-0000:00:02.1-2, RNDIS device
usb 1-2: new high-speed USB device number 11 using ehci-pci
usb 1-2: New USB device found, idVendor=04e8, idProduct=685b
usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-2: Product: GT-I9000
usb 1-2: Manufacturer: samsung
usb 1-2: SerialNumber: 3534670C2A7C00EC
usb-storage 1-2:1.0: USB Mass Storage device detected
scsi host11: usb-storage 1-2:1.0
scsi 11:0:0:0: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
scsi 11:0:0:1: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
sd 11:0:0:0: Attached scsi generic sg1 type 0
sd 11:0:0:1: Attached scsi generic sg2 type 0
sd 11:0:0:0: [sdb] Attached SCSI removable disk
sd 11:0:0:1: [sdc] Attached SCSI removable disk
usb 1-2: USB disconnect, device number 11
usb 1-2: new high-speed USB device number 12 using ehci-pci
usb 1-2: New USB device found, idVendor=04e8, idProduct=6863
usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-2: Product: GT-I9000
usb 1-2: Manufacturer: samsung
usb 1-2: SerialNumber: 3534670C2A7C00EC
rndis_host 1-2:1.0 usb0: register 'rndis_host' at usb-0000:00:02.1-2, RNDIS device, 02:70:46:40:36:32
hrtimer: interrupt took 15171736 ns
perf interrupt took too long (2688 > 2500), lowering kernel.perf_event_max_sample_rate to 50000